View Cooling Parts \\ Cooling Parts at http://www.bjsoffroad.com

Home » Cooling Parts » Cooling Parts


	BJ's Off-Road: Thermostat Housing Gaskets Thermostat housing gasket.	$1.50

	BJ's Off-Road: Bypass Hose Water Pump to Intake AMC V8 Bypass hose that runs from the water pump to the intake manifold. Clamps available separately.	$1.75 - $6.00

	BJ's Off-Road: Thermostat 195 degree (stock) thermostat.	$7.00

	Flow Kooler: Robertshaw High Flow Thermostats These Flow Kooler Robertshaw high flow thermostats open further than most thermostats complimenting our high-flow Flow Kooler water pumps. They are designed to resist large variations in coolant pressures that can occur at high rpm. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced, high performance thermostats feature brass-and-copper construction, and will open at the right temperature, regardless of engine rpm.	$12.50

	BJ's Off-Road: Radiator Hoses AMC V8 Upper and Lower Radiator Hoses for AMC V8 engines.	$13.00

	BJ's Off-Road: Clutch Fan 6-Blade Replacement Fan Blade for Clutch Fans.	$50.00

	BJ's Off-Road: Fan Clutch Thermal fan clutch.	$60.00

	BJ's Off-Road: Aluminum Overflow Tank Kit This custom built aluminum overflow tank will replace your old, yellowing, plastic bottle. This is a direct replacement and requires minor drilling.	$80.00

	Flow Kooler: Flow Kooler High Flow Aluminum Water Pump 1973-91 V8 Flow Kooler water pumps solve low-speed heating problems by doubling the water flow rate at low rpm and idle. At 3,500 rpm, the flow rate returns to normal to prevent too much water flow at high speeds. These pumps also last longer than a stock replacement. They use a specially designed steel plate on the impeller that traps water, eliminates cavitations, increases flow and reduces engine temperatures.	$85.00

	Flow Kooler: Flow Kooler High Flow Aluminum Water Pump Buick 350 Flow Kooler water pumps solve low-speed heating problems by doubling the water flow rate at low rpm and idle. At 3,500 rpm, the flow rate returns to normal to prevent too much water flow at high speeds. These pumps also last longer than a stock replacement. They use a specially designed steel plate on the impeller that traps water, eliminates cavitations, increases flow and reduces engine temperatures.	$100.00

	BJ's Off-Road: Fan Shroud V8 - OEM This is an exact replacement fan shroud for all AMC V8's. Help to keep your rig running cool by replacing your tired, worn out, cracked or missing shroud. By installing this piece you can see your engine temps reduced. You'll be surprised at how well these work!

	BJ's Off-Road: Fan Shroud V8 - Aftermarket This is an exact replacement fan shroud for all AMC V8's. This is constructed from fiberglass so they won't break or crack like the originals.	$120.00

	BJ's Off-Road: Electric Fan and Shroud for Aluminum Crossflow Radiators New bolt-in electric fan and shrouds made specifically for our Aluminum Crossflow Radiators! Two-speed fan flows approximately 2,400 CFM on high and is only 2.61-inches thick!!! This makes it ideal for FSJ's where there are tight radiator to fan clearances!	$175.00 - $300.00

	BJ's Off-Road: Radiators New replacement radiators. Replace your old, leaking, crusty, worn out old radiator with one of our new units. Your engine will thank you!	$275.00

	BJ's Off-Road: Aluminum Crossflow Radiator 258 Straight 6 Engines New bolt-in aluminum crossflow radiators! The crossflow design has two 1-inch rows which offers better coolant flow and more cooling capacity than 4-core radiators. These radiators feature a built-in automatic transmission cooler. These are fully welded (no epoxy, glue or gaskets). These come set up for 258 straight-6 equipped Jeeps.	$350.00

	BJ's Off-Road: Aluminum Crossflow Radiator AMC V8 New bolt-in aluminum crossflow radiators! The crossflow design has two 1-inch rows which offers better coolant flow and more cooling capacity than 4-core radiators. These radiators feature a built-in automatic transmission cooler. These are fully welded (no epoxy, glue or gaskets). These come set up for AMC V8 equipped Jeeps.	$350.00

	BJ's Off-Road: Aluminum Crossflow Radiator GM V8 Conversion New bolt-in aluminum crossflow radiators! The crossflow design has two 1-inch rows which offers better coolant flow and more cooling capacity than 4-core radiators. These radiators feature a built-in automatic transmission cooler. These are fully welded (no epoxy, glue or gaskets). These come set up for FSJ's with a GM Engine Swap.	$350.00