2.5-inch Lift Spring Front 1974-1991

My Account | 0 item(s) View Cart

Home > Suspension Parts > Single Springs > 2.5-inch Lift Spring Front 1974-1991 - Each

2.5-inch Lift Spring Front 1974-1991 - Each

0 Review(s)

| Questions about this item? Ask here.

(See 5 Questions)

Your Price: $295.00

Part Number:13-5037

Quantity

Description
Customer Reviews
Questions and Answers

BJ's 2.5-inch front lift springs. Our Suspension System is All-Spring with NO BLOCKS! Impress your friends, clear more obstacles, and make your rig look like it SHOULD have from the factory! You'll be amazed at how comfortable the ride is and how much better your off-road performance will be!

Made by Deaver Spring here in the USA, this is perfect for someone who wants to put their Full-Size Jeep at the height the factory should have come with! These have been designed to lift your vehicle while still offering a very comfortable ride. The front springs have 9 leaves. Stock shocks and brakelines should work with this kit (measure to verify). Ubolts are not included with individual springs. Nylon pads are installed between leaves for a softer ride.

**Note: 2-3" of lift to be expected upon installation.

Q: Hello,How much is the weight of the item? Thanks.

Asked by: Mototaka Shimizu - 2/27/2017

A: They are approximately 40lbs each

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (2/27/2017)

Q: What are the dimensions? I’m running wagoner 7 leaf packs and the tie bolt is offset 2 inches closer to one end. Will these work for me?

Asked by: Rick - 12/13/2019

A: These springs fit all 74-91 Wagoneers & Grand Wagoneers, as well as 74-83 Cherokee (full size) and 74-88 J-series pickups.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (12/16/2019)

Q: If I convert my stock height 1986 Grand Wagoneer to the 2.5" leaf spring height front and rear will that mean that I will also have to upgrade many other parts as well such as shock absorbers,pitman arm etc?

Asked by: Hang 10 - 6/3/2020

A: Not necessarily. With the 2.5" springs, you can reuse your stock pitman arm and brakelines (unless they are worn out or someone installed shorter versions). For the shocks, you "can" reuse the stock height so long as they are long enough, but most people choose to replace them at the same time as the springs.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (6/3/2020)

Q: Do you have a 2.5 inch Lift rear spring option for a 74 Cherokee?

Asked by: Chuck - 11/9/2020

A: No, there are no springs available for the rear of 74/75 models as they were different than the years before and the years after, with upwards of 30+ combinations during just those 2 years.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (11/9/2020)

Q: Will the stock u bolts work with the 2” lift springs?

Asked by: Berg - 9/9/2021

A: You should never reuse U-bolts, as they are meant for a one-time installation. Here is a link to purchase new ones: https://www.bjsoffroad.com/Front-U-bolt-Set_p_1383.html

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Amanda (9/15/2021)