4350 Motorcraft to Squarebore 4-Barrel Carburetor Adapter

My Account | 0 item(s) View Cart

Home > Engine Parts > AMC V8 > Fueling Parts > 4350 Motorcraft to Squarebore 4-Barrel Carburetor Adapter

0 Review(s)

| Questions about this item? Ask here.

(See 6 Questions)

Your Price: $73.00

Free Shipping.

Part Number:14-6082

Quantity

Description
Customer Reviews
Questions and Answers

Aluminum carburetor adapter for the stock 4bbl 4350 Motorcraft to a Square Bore Intake. Hardware and Gaskets are Included. This can be used to swap your stock 4350 onto a new intake, or swap a new aftermarket 4bbl carb to your stock 4bbl intake. This will also work to adapt a Holley Sniper EFI to the stock 4bbl AMC intakes!

Q: I have a stock 4 barrel intake manifold and want to put the 600 cfm edelbrock 1406 carb on it will this work?

Asked by: Jim - 3/7/2019

A: Yes, this is what you would need for that!

Was this answer helpful? 1 of 2 Customer(s) found this Answer helpful.

Answer provided by: Ryan (3/13/2019)

Q: Knowing that this adapter allows for a square bore carburetor to install over the original AMC V8 spear bore intake manifold. Do I need additional gaskets (excluding the one in the kit) for mounting the carburetor onto this adapter?

Asked by: Rubio - 5/29/2020

A: No, this kit includes the necessary gaskets.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (6/1/2020)

Q: will the pcv fitting screw into the adapter?

Asked by: Shawn - 12/9/2020

A: Yes, the adapter has a threaded port visible in the main picture.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (12/10/2020)

Q: Will this work with the Holley Sniper system ?

Asked by: Shawn Reeves - 7/9/2021

A: Yes

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (7/10/2021)

Q: Will this work from a stock manifold to motorcraft carburetor in replacement for the original motorcraft carb base plate?

Asked by: Harrison - 1/30/2023

A: No, this is used to mate a stock 4350 to a square-bore intake, or an aftermarket 4bbl carburetor to the stock 4350 spread-bore intake.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (2/1/2023)

Q: Does this adapter block off the egr port on the factory intake? It looks to have the kick off to one side but I can’t tell. The picture does not show the underside.

Asked by: Richard B. - 2/28/2023

A: No, this doesn't block the EGR port.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (3/6/2023)