6-inch Lift Spring Front 1974-1991

My Account | 0 item(s) View Cart

Home > Suspension Parts > Single Springs > 6-inch Lift Spring Front 1974-1991 - Each

6-inch Lift Spring Front 1974-1991 - Each

0 Review(s)

| Questions about this item? Ask here.

(See 4 Questions)

Your Price: $305.00

Part Number:13-5039

Quantity

Description
Customer Reviews
Questions and Answers

BJ's Off-Road 6-inch front lift springs. Our Suspension System is All-Spring with NO BLOCKS! Impress your friends, clear more obstacles, and make your rig look like it SHOULD have from the factory! You'll be amazed at how comfortable the ride is and how much better your off-road performance will be!

Made by Deaver Spring here in the USA, this is perfect for someone who wants to put their Full-Size Jeep at the height the factory should have come with! These have been designed to lift your vehicle while still offering a very comfortable ride. The front springs have 9 leaves. Stock shocks and brakelines will not work with this kit. Ubolts are not included with individual springs. Nylon pads are installed between leaves for a softer ride.

**Note: 5.5-6.5" of lift to be expected upon installation. Also, note that a very small percentage of Full Size Jeeps had the front spring hanger and shackle hangers closer together; this can cause the front 6" springs to pin the shackle forward. If this happens, you can either install a bumpstop forward of the front shackle, or you can install our extended front shackle available here: HERE.

Q: Can you guys make a 6 inch lift with no blocks for a 67 gladiator?

Asked by: codie - 1/13/2016

A: We will be releasing early J-truck lift kits in the upcoming weeks. We will include stock-height, 2" lift, 4" lift and 6" lift.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (1/14/2016)

Q: Is this a 6" lift when mounted under or over the front Axle? Also, If I install the high steer conversion, will I need springs to be under or over the front axle so that the high steer drag link doesn't hit the leaf springs?

Asked by: Garrett - 5/31/2019

A: This kit provides a 6" lift when installed in the factory orientation (spring under up front and spring over in the rear). If you do an SOA / SF conversion at the same time as these springs, you'd have around 12-13" of lift. The high-steer conversion is typically used only once you go to an SOA conversion.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (6/3/2019)

Q: I have a 1975 Jeep Cherokee S. I have found that a lot of lifts are for 1976-91 due to the wheel base I believe. The wheel base on my cherokee is approximately 110". Will these springs work for my Cherokee?

Asked by: Matt - 12/8/2019

A: The issue isn't the wheelbase, rather its that the rear springs on 74-75 were different than 76-up (different style, width, length, bushing size and bushing type). The fronts were the same from 74-91, which is why these fronts will fit your 1975. The rears however won't, so you'd have to come up with either custom rear springs or modify yours to add more leaves.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (12/9/2019)

Q: With this lift of 6" on my 74 jeep wagoneer. Do you offer a drop pitman arm? What size tires do you think i will be able to run? Do you offer the extended brake lines? And shocks for the kit?

Asked by: Jason - 10/16/2021

A: Yes, these front springs will lift the front of your 74 Wagoneer 6" over the factory stock height. We do have a drop pitman arm here: https://www.bjsoffroad.com/Drop-Pitman-Arm-1974-1991_p_1227.html. You can run a 33" tire with this front lift. Brakelines are here: https://www.bjsoffroad.com/Stainless-Steel-Brake-Line-Kit-3-5-Inches-of-Lift_p_252.html. Shocks are here: https://www.bjsoffroad.com/search.asp?keyword=shocks&search=

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (10/18/2021)