Skip to main content

Free Shipping on every order over $50 in the Lower 48

and pay NO Sales Tax!

(1)

BJ's Off-Road 1963-1973 Wagoneer 4-Inch Lift Kit!!

$1,700.00
Part Number:
BJ4EBA
Shipping:
Calculated at Checkout

Have a Question? Ask a product expert! Call or Text 253-320-7604

Product Details

IT'S HERE!! BJ's Off-Road is proud to be the first company to offer a complete all-spring lift kit made specifically for the 1963-1973 Wagoneers! And, they are USA Made by Deaver Spring! 

No longer do you have to sit by and watch the later-model rigs get all the attention! Give your rig the look it should have had from the factory!  

This kit uses 4 new leaf springs (no blocks) to acquire the 4-inch lift, and includes new spring eye bushings! This will bolt on using simple hand tools.    Nylon pads are installed between leaves for a softer ride.

NOTE:  This kit DOES NOT include U-Bolts.  Here are the specs but you must confirm with your rig as we won't be held responsible if they don't fit:

7/16 ROUND:
FRONT" 2.3125" x 6."         QTY 3
FRONT WIDE: 3" x 6.75"   QTY 1

1/2"
ROUND:
REAR: 2.75" x 7"       QTY 4 

 
 
  • Fits 1963-1973 Wagoneer
  • 4 New Leaf Springs (No Blocks)
  • Spring Eye Bushings included
  • Braided Stainless Steel Extended Brakelines With Factory Fittings Available
  • Will Not Fit 1974-1975 Model Wagoneers
  • Will Not Fit 1963-1975 J-Trucks
  • Drop Pitman Arm required
  • Springs and brakelines are all Made in the USA!!
  • Front pack has 9 leaves each, and rear pack has 7 leaves plus 2 overload leaves
  • Lift Kit Instructions (PDF Format) (76-91 Instructions, but similar procedure)


Reviews (1)

  • Excellent
    5

    Posted by Adrian Quintana on Apr 22nd 2016

    I bought this lift a couple years ago. There were delays in the manufacturing at the subcontractor so it took longer than advertised. However, the kit is excellent. Fits perfectly, and rides very smooth, like a Cadillac. The included overload leafs for rear add about 3/4 inch to the rear height versus the front. When fully loaded up it will sit about level. I didn't like the look so I took the overloads out and haven't had any problems. I combined this kit with my own spring mounts for rear axle and spring over for front axle and increased total lift height to 9 inches. I fit 33x12.5 tires now with only very minor rubbing at max compression.