Edelbrock 2132 Performer Plus Camshaft with Lifters

Edelbrock's Performer Plus 2132 Camshaft kit is designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.

Read more at https://www.edelbrock.com/performer-plus-camshaft-kit-for-amc-290-401-v8-2132.html

• Duration @ .050 Int / Exh: 204° / 214°
• Lift @ Valve Int / Exh: .448" / .472"
• Lobe Separation: 110°
• Intake Center Line: 105°
• Idle Vac. @ 1000 RPM: 15"

INSTALLATION NOTES: Use Edelbrock Performer Timing Set HERE.  Other timing sets may be machined in a retarded position and are not recommended for this camshaft installation.  The Edelbrock Performer Timing Sets features three keyways for specific timing selection.  Always use the – or straight-up timing mark when installing Performer-Plus camshafts with Performer Timing Sets.

**NOTE: Use only stock ratio rocker arms