Dana 44 Front Caliper Bracket and Backing Plate

Home > Axle Parts > Dana 44 Front and Rear > Dana 44 Spindles and Parts > Front Caliper Brackets and Backing Plates Pair

Front Caliper Brackets and Backing Plates Pair

0 Review(s)

| Questions about this item? Ask here.

(See 4 Questions)

Your Price: $165.00

Free Shipping.

Part Number:SA10

Quantity

Description
Customer Reviews
Questions and Answers

Solid Axle Industries Dana 44 Front Caliper Bracket with backing plate. Sold in pairs for use with Dana 44 6 bolt spindle knuckles. Each unit is manufactured from heavy gauge steel, features Zinc plating for corrosion resistance, and the dust shield can be removed if desired. These are a direct replacement for GM part numbers 14023429 and 14023428.

Note that these caliper brackets work with calipers that have a mounting pin distance of 7.03”.

Q: I'm converting a 75 j10 from drum to disc. Will these work if I use the spindle and hub parts from a 77 parts rig? Are there two different size spindles used in 77? Thanks.

Asked by: Todd Norris - 3/2/2019

A: These will fit 77-later models. But, they may work if you swap out the spindle and hub parts from a 77-later (we can't guarantee fitment as we haven't test fit them on the earlier rigs with later hub / spindle parts). 77 should have smaller bearings, while 78-up used larger bearings.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (3/4/2019)

Q: Hi, will these fit a 1979 J20 with a Dana 44?

Asked by: Gary Hebbard - 6/21/2019

A: No, these will only fit 6-lug application (will not work with 8-lugs)!

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (6/23/2019)

Q: I have a 1986 chevy Custom deluxe C-10 4x4 1/2 ton. It was bought off the show room floor by my father in law, it has never left the family. I have found 2 sites that have the front Caliper bracket and backing plate as one piece. You are one of them. We have noticed this truck is an unusual blend of a C-10 and K-10. The Dana 44 backing plates have thrown us for a loop. We cannot find record or parts where Chevy used these on trucks. I apologize for the ridiculous question, but are these "pair" right side left side? And if these arent the correct parts we are looking for can we return them?

Asked by: KARA - 8/17/2019

A: These are sold as a pair (one left / driver side, and one right / passenger side). They are for the Dana 44, and should fit the Chevy application as well. We do allow returns (see out terms and conditions for return policies).

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (8/20/2019)

Q: Will these fit on Chevy's 10 bolt front diff?

Asked by: Frank Basham - 8/4/2020

A: They should, as Dana 44's are all basically the same. But, since we are a Full Size Jeep specific company, we don't guarantee fitment on anything other than Full Size Jeeps.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (8/5/2020)