| PHONE OR TEXT: 253-320-7604 | PHONE HOURS: MON - THU, 5 a.m. - 2 p.m. PST
> OBD-II / CAN Interface
OBD-II / CAN Interface
OBD-II / CAN Interface
Questions about this item? Ask here.
See 1 Questions
Add to Cart
Review this item
Add to Wish List
Questions and Answers
Dakota Digital's OBD-II / CAN interface is a great addition to your Dakota Digital Gauge Package, and helps bridge the gap between your conversion engine's ECM and the gauge cluster, reading many of the outputs directly from the ECM.
From Dakota Digital:
The BIM-01-2 OBD-II (J1850/CAN) Interface allows you to plug directly into the engine diagnostic port, extracting engine and transmission data from the vehicle's computer (ECM). The BIM-01-2 will collect and output the following information to Dakota Digital Instrument Systems *:
Check Engine Indicator
Intake Air Temp
Ambient Air Temp
Please note: Due to the various factory and modified ECM's, additional data including (Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, and Gear Position) may be available, but will vary from application to application. Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp, Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, or Gear Position displays since this is a function of the ECM and matching OEM functional sensors.
This product can provide a +/- 25 percent calibration to compensate for tire size or gear changes which have affected the speedometer output.
*The BIM-01-2 is designed to decode the information provided by the ECM through OBD-II and supply this information to the VFD3 rev. G, VHX and HDX control box instrument systems only. Earlier control boxes (with an aluminum case) are not compatible with the BIM family of Expansion Modules.
**The BIM-01-2 is designed for J1850 and CAN OBD protocols only. If you are concerned about compatibility with your vehicle please contact our sales or tech department.
***The BIM-01-2 is a direct replacement and upgrade to the BIM-01-1
Will this allow my sniper to work with Dakota gauges? part # 11-2090
Yes, this allows the Dakota Gauges to read the info from the Sniper, as well as certain other EFI units.
Was this answer helpful?
1 of 1
Customer(s) found this Answer helpful.
Answer provided by:
All FSJ's with Engine Conversions that use ECM's
Turn Signal Lever with Cruise 1987-1991
Not for Sale.
Battery Hold Down 1986-1991
Electronic Signal to Mechanical Speedometer Cable Drive Adapter
Starter Solenoid 1971-1987
Starter Solenoid 1980-1987
Dakota Digital Dash Light Dimming Kit