Product Details
Extra thick polyethylene replacement gas tanks. These tanks include new straps, lock rings and o-rings. Tank is 21 gallon capacity and is approximately 53" long. 1978-1979 model tanks have an approximately 1" diameter filler neck. If you have a 1978 model, you need to verify the filler neck size before ordering (1977 model fill necks are approximately 2" diameter).
**Note: Outside Diameter of Fill Neck on Tank is 2"
- Fits 1970-1977 Wagoneer
- Fits 1974-1977 Cherokee
- Nearly 1/4-inch thick for added strength
- This tank will NEVER rust!
- This tank can withstand -150F without freezing!
- No welds or seams to fail or leak!
- 5 year warranty
- 21 gallon capacity
- Free Shipping in the Lower 48!
- Made in the USA
- Strap Instructions HERE
Reviews (1)
-
Only thing available
I bought this because I couldn't find anything else. They all seem to be exactly the same no matter what vendor. Overall it is a quality tank, but the brackets were a horrible fit for 1972 Wagoneer. I had to fabricate my own or the tank would fall out. It's about 2 inches shorter than the steel tank but you have to mount it fully forward or it will contact the rear axle. Filler neck is only a molded nipple, not long gooseneck like original. You'll have to buy extra hose, cut it, then and patch them together with short length of steel pipe. Fill vent is not in middle of top like original even though there is a boss on the mold, rather it is at rear next to vent and fill neck. You'll have to extend this forward to connect to original hose. I used 1/2 copper pipe and couple of elbows. Also original tank had 3 vent lines, this has only one at rear. Even though they offer different part number for later Wagoneers, it seems that this tank more closely matches the later designs and isn't really designed as exact replacement. You'll be happy when you get it in and don't have any leaks or rust, but just throw away the brackets and you'll save yourself a lot of headaches.