Tailgate Window Lift Pins Upgraded Clip Design!

My Account | 0 item(s) View Cart

Home > Body and Exterior Parts > Tailgate > Tailgate Window Lift Pins Upgraded Clip Design!

6 Review(s)

| Questions about this item? Ask here.

(See 4 Questions)

Your Price: $25.00

Free Shipping.

Part Number:KIT-7586

Quantity

Description
Customer Reviews
Questions and Answers

Replacement tailgate window lift pins! These replace the worn out lift pins on the tailgate window regulator arms.

These are also great since it upgrades the clip design and you can easily take the clips on and off and they are reusable!

The pin has a shoulder to retain your factory spring and spring cup (spring and spring cup not included)

View All Reviews

Window lift pins

Installed upgraded window pins on assembly tonight. They fit pretty well. Had to use a file to clean hole, before pins fit, which I expected. I would recommend including washers with these kits. The screws bottomed out in the pin before the shoulder touched the bracket. One of The pins protruded thru the bracket, so it definitely had to have a washer. The assembly was salvaged from a 77 wagoneer, so there may be some differences in material thickness throughout the years. I would still recommend this to others.

Did you find this helpful? 6 of 6 Found Helpful

Reviewed by: Mack Hensley from Pierceville, KS. on 10/29/2018

Works very well. Easy to install. However it would be nice if the kit included the spring and washer also .

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: Rob Roberson from Longview. on 6/6/2019

Frustration Eliminators

These clips eliminate a significant amount of time and swearing when I work in the tailgate!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Devin Cole from ND. on 7/19/2022

Perfect

Super easy instal, if you are doing the tailgate this is a must have as I had lots of in and out with the glass and rest fitting. As mentioned, I agree that it would be great if it came with the washer and spring

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Thomas Oxenham from Richmond va. on 8/23/2021

Village idiot

So much easier using these. I needed to dry in my body but still be able to repair tailgate at a later date and these made it a snap to remove or replace my glass as needed.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Sharra Kucera from Rainbow. on 6/1/2020

Q: Do I need to use the new pins or will the clips fit my old ones as they are pressed in and would have to be drilled out. Also on the lower window channel the rear glass sits in, I notice you carry the stainless steel version. Is it much stronger?

Asked by: Mike Murphy - 5/25/2021

A: If you use the new lift pin conversion kit, you will use the clips in that kit. Yes, the stainless version is strong and won't rust like other styles.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (5/27/2021)

Q: Do these pins prevent the glass "lifter" from falling off the arms? I'm having issues with the factory pins popping out of the lifter.

Asked by: Mike Bet - 3/26/2022

A: Yes, and it also makes them much easier to install / remove when needed

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ryan (3/28/2022)

Q: The installation process seems pretty straight forward, but on a 1979 Cherokee, how am I supposed to remove the old pins?

Asked by: Joseph Burriss - 8/2/2022

A: Grinding or Drilling is the preferred method. Just make sure to not enlarge the openings when doing so.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (8/3/2022)

Q: Do you have installation instructions for these?

Asked by: Mike Humphrey - 11/23/2022

A: We don't have written instructions at this time. But its very easy. You either grind off the back of the existing rivet, or drill it out (being careful not to enlarge the existing hole that the rivet is in). Then these just slide in place and the screw holds it firm (you can use a dab of blue Loctite (the removable-with-hand-tools type). Next you reinstall the factory spring and spring cup on each pin, slide the lift channel over the new pin, and then slide the retaining clip on and you are done.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Ryan (11/28/2022)