Transfer Case Vacuum Switch - Dash Mounted

BJ's Off-Road is proud to offer a conversion kit to replace your stock vacuum switch for the NP229, NP228 and NP219 transfer cases! This switch mounts like a headlight switch and you push and pull the knob to engage or disengage the 4WD.
On the switch, P routes to the engine, while A & B route to the transfer case (the other two ports are not used, and do not need to be blocked off). Position A & B may be swapped depending on if you want the transfer case engaged or disengaged when the switch is pushed in (B is energized when pushed in).